Proflow™ II-E Filter Cartridges
Parker Membrane Filters
Chemically-resistant cartridge for ultrapure microelectronics fluids and gases
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Item # |
Treatment Application |
Insert Style |
End Fittings |
Nominal Length |
Membrane |
Support Layers |
---|---|---|---|---|---|---|
36-60805 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60810 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60820 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60830 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60840 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0805 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0810 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0820 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0830 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0840 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10305 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10310 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10320 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10330 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-10340 | Treatment Application N/A Standard | Insert Style N/A No Insert | End Fittings N/A 222/Flat | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50305 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50310 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50320 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Flat | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50330 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Flat | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-50340 | Treatment Application N/A Standard | Insert Style N/A (Standard) Encapsulated | End Fittings N/A 222/Flat | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60305 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60310 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60320 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 20 in500 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60330 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 30 in750 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
34-60340 | Treatment Application N/A Standard | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 40 in1000 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |