Proflow™ II-E Filter Cartridges
Parker Membrane Filters
Chemically-resistant cartridge for ultrapure microelectronics fluids and gases
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
The Proflow™ II-E filter cartridge uses a PTFE membrane along with high purity polypropylene supports that provide an economical alternative to all-fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet packed for quick installation and lower extractables.
Item # |
Treatment Application |
Insert Style |
End Fittings |
Nominal Length |
Membrane |
Support Layers |
---|---|---|---|---|---|---|
36-A0705 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 226/Fin | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0805 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0G05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0H05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0R05 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 5 in130 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0R10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0H10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0G10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0810 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Fin® | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0710 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 226/Fin | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0610 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0310 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 222/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0210 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A 226/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0110 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A DOE | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-A0010 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A 1/2" Shortened on 222 Fitting | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60R10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Recessed Endcap | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60H10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 213/Recessed Endcap (Ametek) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60G10 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 120/Internal/Recessed Endcap | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60810 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Fin® | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60710 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 226/Fin | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60610 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 020/Internal/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60310 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 222/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60210 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A 226/Flat | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60110 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A DOE | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |
36-60010 | Treatment Application N/A Extended Flushed with 18 Megohm DI Water | Insert Style N/A Stainless Steel Encapsulated Polysulfone | End Fittings N/A DOE (CUNO®) | Nominal Length N/A 10 in250 mm | Membrane N/A PTFE | Support Layers N/A Polypropylene |