Industry’s Filtration Partner
The Purtrex depth filter (Figure 1), is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE Water & Process Technologies' patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity.

Purtrex' true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters.

Purtrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.
1 - 25 of 288 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Item #

Type

Nominal Micron Rating

Cartridge Length

End #1 Adapter

Nominal Inside Diameter

Nominal Outside Diameter

N/A PX N/A 1 µm N/A 9.75 in24.8 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9.75 in24.8 cm N/A Extended Core N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9.75 in24.8 cm N/A 222 O-Ring N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9.75 in24.8 cm N/A Standard Plain End N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9 7/8 in25.1 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9 7/8 in25.1 cm N/A Extended Core N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9 7/8 in25.1 cm N/A 222 O-Ring N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 9 7/8 in25.1 cm N/A Standard Plain End N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 10 in25.4 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 10 in25.4 cm N/A Extended Core N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 10 in25.4 cm N/A 222 O-Ring N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 10 in25.4 cm N/A Standard Plain End N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 19.5 in49.5 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 19.5 in49.5 cm N/A Extended Core N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 19.5 in49.5 cm N/A 222 O-Ring N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 19.5 in49.5 cm N/A Standard Plain End N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 20 in50.8 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 20 in50.8 cm N/A Extended Core N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 20 in50.8 cm N/A 222 O-Ring N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 20 in50.8 cm N/A Standard Plain End N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 29.25 in74.3 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 29.25 in74.3 cm N/A Extended Core N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 29.25 in74.3 cm N/A 222 O-Ring N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 29.25 in74.3 cm N/A Standard Plain End N/A 1 in2.5 mm N/A 2.50 in6.4 cm
N/A PX N/A 1 µm N/A 30 in76 cm N/A 1 inch (25.4 cm) Open End Gasket N/A 1 in2.5 mm N/A 2.50 in6.4 cm
1 - 25 of 288 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »