Industry’s Filtration Partner

Two mixing actions and an adjustable roto/stator gap provide maximum shear and efficieny.

The Arde Barinco Axial-Flow Reversible Homogenizer provides consistent, measured flow through its high-shear zone. Standard radial flow mixers use total flow calculated with optimistic assumptions. Not the precision most process engineers require.

For more than 30 years, process engineers in the chemical, food, cosmetics, pharmaceutical, textile and coatings industries have relied on the Reversible Homogenizer from Arde Barinco. Its high-shear axial flow and highly efficient dual mode process disperses, emulsifies, and ‘wets out’ powders and re-suspends settled solids. And it works in a fraction of the time it takes ordinary mixers.

ADJUSTABLE SHEAR

With a simple adjustment, you set the gap between rotor and stator exactly where you want it: tighten it for the highest shearing rates of any batch rotor/stator on the market. This creates a degree of precision that produces colloid mill-type results from a rotor/stator batch mixer.

TRUE REVERSIBILITY

Other mixers may claim to be reversible, but their radial impellers simply push the mixture sideways, regardless of which direction they turn. The Arde Barinco Reversible Homogenizer offers true reversibility. The Reversible Homogenizer’s efficient, axial flow impeller creates two distinct mixing actions, depending on direction. Downward Vortex flow pulls in solids that tend to float on top and pushes off solids that settle on the bottom. The upward Umbrella flow ensures thorough control of the mixing at the highest shearing and recirculation rates without splashing or incorporating air.

REMARKABLY EFFICIENT

The Reversible Homogenizer’s incredible efficiency comes from a hydrodynamically optimized pumping design that provides higher recirculating rates through a far wider range of viscosity profiles. In addition, every model utilizes close-clearance zones to provide a combination of intense mechanical and hydraulic shear forces. Because the Reversible Homogenizer works faster than conventional mixers, you increase throughput without increasing operating costs. Why run two standard mixers when one Reversible Homogenizer can do the job? There’s a wide range of Reversible Homogenizers available, from the lab-size CJ-4C to the high-volume C-5-3. Each mixes materials in a wide range of viscosities, and each outperforms competitive mixers— even those with higher power requirements.
1 - 23 of 23 | Results Per Page | View | Unit of Measure
1 

Item #

Power

Rotor Diameter

RPM

Tip Speed

Flow

Immersion Depth

CJ-4D N/A 0.75 hp N/A 1.88 in N/A 10,000 N/A 4,920 ft/min N/A 88 gpm N/A 16 in
CJ-4BX N/A 0.5 hp N/A 1.88 in N/A 8,000 N/A 3,935 ft/min N/A 63 gpm N/A 16 in
CJ-20-1 N/A 2 - 3 hp N/A 4 in N/A 3,600 N/A 3,665 ft/min N/A 200 gpm N/A 24 in
CJ-20-2 N/A 2 - 3 hp N/A 4 in N/A 3,600 N/A 3,665 ft/min N/A 200 gpm N/A 33 in
CJ-20-3 N/A 2 - 3 hp N/A 4 in N/A 3,600 N/A 3,665 ft/min N/A 200 gpm N/A 45 in
C-1-1 N/A 5 - 7.5 hp N/A 3.88 in N/A 3,600 N/A 3,655 ft/min N/A 235 gpm N/A 33 in
C-1-2 N/A 5 - 7.5 hp N/A 3.88 in N/A 3,600 N/A 3,655 ft/min N/A 235 gpm N/A 45 in
C-1-3 N/A 5 - 7.5 hp N/A 3.88 in N/A 3,600 N/A 3,655 ft/min N/A 235 gpm N/A 60 in
CJ-50-1 N/A 5 - 7 hp N/A 6 in N/A 3,600 N/A 5575 ft/min N/A 575 gpm N/A 33 in
CJ-50-2 N/A 5 - 7 hp N/A 6 in N/A 3,600 N/A 5575 ft/min N/A 575 gpm N/A 45 in
CJ-50-3 N/A 5 - 7 hp N/A 6 in N/A 3,600 N/A 5575 ft/min N/A 575 gpm N/A 60 in
CJ-75-1 N/A 7 - 10 hp N/A 6.25 in N/A 3,600 N/A 5800 ft/min N/A 735 gpm N/A 33 in
CJ-75-2 N/A 7 - 10 hp N/A 6.25 in N/A 3,600 N/A 5800 ft/min N/A 735 gpm N/A 45 in
CJ-75-3 N/A 7 - 10 hp N/A 6.25 in N/A 3,600 N/A 5800 ft/min N/A 735 gpm N/A 60 in
C-2-1 N/A 7 - 10 hp N/A 5 in N/A 3,600 N/A 4,710 ft/min N/A 464 gpm N/A 33 in
C-2-2 N/A 7 - 10 hp N/A 5 in N/A 3,600 N/A 4,710 ft/min N/A 464 gpm N/A 45 in
C-2-3 N/A 7 - 10 hp N/A 5 in N/A 3,600 N/A 4,710 ft/min N/A 464 gpm N/A 60 in
C-3-1 N/A 15 - 25 hp N/A 5.75 in N/A 3,600 N/A 5,400 ft/min N/A 905 gpm N/A 45 in
C-3-2 N/A 15 - 25 hp N/A 5.75 in N/A 3,600 N/A 5,400 ft/min N/A 905 gpm N/A 60 in
C-3-3 N/A 15 - 25 hp N/A 5.75 in N/A 3,600 N/A 5,400 ft/min N/A 905 gpm N/A 85 in
C-5-1 N/A 25 -50 hp N/A 6.5 in N/A 3,600 N/A 6,120 ft/min N/A 1,730 gpm N/A 45 in
C-5-2 N/A 25 -50 hp N/A 6.5 in N/A 3,600 N/A 6,120 ft/min N/A 1,730 gpm N/A 60 in
C-5-3 N/A 25 -50 hp N/A 6.5 in N/A 3,600 N/A 6,120 ft/min N/A 1,730 gpm N/A 85 in
1 - 23 of 23 | Results Per Page | View | Unit of Measure
1