Industry’s Filtration Partner
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

The AG 2PASS Series has been specifically designed for 2-pass systems. These elements are made of pre-rinsed components avoiding any scaling potential on the second pass at start-up thus avoiding any loss of production.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Flow Average

Salt Rejection Average (NaCl)

Active Area

Outer Wrap

Part Number

Dimension A (Length)

Dimension C (Outside Diameter)

AG4040FM 2PASS N/A 2200 gpd85 m³/day N/A 99.5 % N/A 85 ft²7.9 m² N/A Fiberglass N/A 1264262 N/A 40.0 in101.6 cm N/A 3.9 in9.9 cm
AG8040F 2PASS N/A 9200 gpd34.8 m³/day N/A 99.5 % N/A 350 ft²32.5 m² N/A Fiberglass N/A 1264190 N/A 40.0 in101.6 cm N/A 7.9 in20.1 cm
AG8040F 400 2PASS N/A 10500 gpd39.8 m³/day N/A 99.5 % N/A 400 ft²37.2 m² N/A Fiberglass N/A 1264191 N/A 40.0 in101.6 cm N/A 7.9 in20.1 cm
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1