| Items |
 AG2540FM AG Series Standard Brackish Water RO Elements |
AG2540TM AG Series Standard Brackish Water RO Elements |
AG4025T AG Series Standard Brackish Water RO Elements |
AG4026F AG Series Standard Brackish Water RO Elements |
AG4040C AG Series Standard Brackish Water RO Elements |
|||||
| Membrane | A-Series, Thin-Film Membrane (TFM™) | |||||||||
| Flow Average | 710 gpd2.7 m³/day | 710 gpd2.7 m³/day | 1560 gpd5.9 m³/day | 1560 gpd5.9 m³/day | 2350 gpd8.9 m³/day | |||||
| Salt Rejection Average (NaCl) | 99.5 % | |||||||||
| Salt Rejection Minimum (NaCl) | 99.0 % | |||||||||
| Note |
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%. Testing conditions: 2,000 ppm NaCl solution at 225 psig (1,551 kPa) operating pressure, 77 ºF, pH 7.5 and 15% recovery. |
|||||||||
| Active Area | 29 ft²2.6 m² | 29 ft²2.6 m² | 60 ft²5.6 m² | 60 ft²5.6 m² | 90 ft²8.4 m² | |||||
| Outer Wrap | Fiberglass | Tape | Tape | Fiberglass | Cage | |||||
| Dimension C (Outside Diameter) | 2.4 in6.1 cm | 2.4 in6.1 cm | 3.9 in9.9 cm | 3.9 in9.9 cm | 3.9 in9.9 cm | |||||
| Dimension A (Length) | 40.0 in101.6 cm | 40.0 in101.6 cm | 25.0 in63.5 cm | 26.0 in66.7 cm | 40.0 in101.6 cm | |||||
| Dimension B1 | 0.75 inOD: 1.90 cm | 0.75 inOD: 1.90 cm | 0.625 in1.59 cm | 0.625 in1.59 cm | 0.625 in1.59 cm | |||||
| Part Number | 1206727 | 1206729 | 1206754 | 1206756 | 1206757 | |||||
| Boxed Weight | 5 lb2.3 kg | 5 lb2.3 kg | 5 lb2.3 kg | 6 lb2.7 kg | 8 lb3.5 kg | |||||
| Typical Operating Pressure | 200 psig1379 kPa | |||||||||
| Typical Operating Flux | 10 - 20 GFD15 - 35 LMH | |||||||||
| Maximum Pressure (Tape Elements) | 450 psig3103 kPa | |||||||||
| Maximum Pressure (Other Outerwrap) | 600 psig4137 kPa | |||||||||
| Maximum Operating Temperature | 122 ºF50 ºC | |||||||||
| Maximum Cleaning Temperature | 122 ºF50 ºC | |||||||||
| Optimum Rejection Recommended pH | 7.0 - 7.5 | |||||||||
| Operating Range Recommended pH | 4.0 - 11.0 | |||||||||
| Cleaning Range Recommended pH | 2.0 - 11.5 | |||||||||
| Recommended Pressure Drop Over an Element | 12 psig83 kPa | |||||||||
| Recommended Pressure Drop Per Housing | 50 psig345 kPa | |||||||||
| Chlorine Tolerance | 1,000+ ppm-hours, Dechlorination Recommended | |||||||||
| Feedwater | NTU < 1 SDI < 5 | |||||||||
| Note |
These elements are shipped dry unless specified WET Trademark of General Electric Company; may be registered in one or more countries |
|||||||||
|
||||||||||
