Industry’s Filtration Partner
The H-Series proprietary thin-film nanofiltration membrane elements are characterized by an approximate molecular weight cut-off of 150-300 daltons for uncharged organic molecules. Divalent and multivalent ion rejection is dependent upon feed concentration and composition.

HL Nanofiltration Elements are used for water softening, color removal, and reduction of THM potential.
Unit of Measure

Element Specification

Membrane

N/A H-Series, Thin-Film Membrane (TFM™)

Flow Average

N/A 2400 gpd9.1 m³/day

Salt Rejection Average (MgSO4)

N/A 98.0 %

Salt Rejection Minimum (MgSO4)

N/A 96.0 %

Note

N/A Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 2,000ppm MgSO4 solution at 100psig (690 kPa) operating pressure, 77ºF, pH7.5 and 15% recovery.

Active Area

N/A 89 ft²8.2 m²

Outer Wrap

N/A Fiberglass

Part Number

N/A 1207236

Dimensions and Weight

Dimension A (Length)

N/A 40.0 in101.6 cm
Dimension B1 N/A 0.75 inOD: 1.90 cm

Dimension C (Outside Diameter)

N/A 3.9 in9.9 cm

Boxed Weight

N/A 8 lb3.5 kg

Operating and CIP parameters

Typical Operating Pressure

N/A 70 - 300 psig483 - 2069 kPa

Typical Operating Flux

N/A 10 - 20 GFD15 - 35 LMH

Maximum Pressure (Tape Elements)

N/A 450 psig3103 kPa

Maximum Pressure (Other Outerwrap)

N/A 600 psig4140 kPa

Maximum Operating Temperature

N/A 122 ºF50 ºC

Maximum Cleaning Temperature

N/A 104 ºF40 ºC

Optimum Rejection Recommended pH

N/A 6.0 - 7.0

Operating Range Recommended pH

N/A 3.0 - 9.0

Cleaning Range Recommended pH

N/A 2.0 - 10.5

Recommended Pressure Drop Over an Element

N/A 12 psig83 kPa

Recommended Pressure Drop Per Housing

N/A 50 psig345 kPa

Chlorine Tolerance

N/A 1,000+ ppm-hours, Dechlorination Recommended

Feedwater

N/A NTU < 1 SDI < 5

Note

N/A This product ships dry.
Trademark of General Electric Company; may be registered in one or more countries

  • 1 Internal diameter unless specified OD (outside diameter).