The DEPTH-CLEAR U Series is designed for the removal of carbon particles and low levels of moisture that result from the break down of dielectric oil. Removal of these contaminants increases the dielectric strength and the service life of the oil.
DEPTH-CLEAR U Series is available in three different grades, NA300, NA600 and NA1000. The NA300 is designed to remove particles above 3.0 micron and offers the highest filtration efficiency. The NA300 is commonly used to remove the finely dividedmore carbon particles found in circuit breakers. The more open NA600 and NA1000 are used on heat-degraded oils found in transformers. The NA1000 is the most open of the utility series and provides higher flow rates and lower pressure drops. less
DEPTH-CLEAR U Series is available in three different grades, NA300, NA600 and NA1000. The NA300 is designed to remove particles above 3.0 micron and offers the highest filtration efficiency. The NA300 is commonly used to remove the finely dividedmore carbon particles found in circuit breakers. The more open NA600 and NA1000 are used on heat-degraded oils found in transformers. The NA1000 is the most open of the utility series and provides higher flow rates and lower pressure drops. less
Unit of Measure
Specifications
|
Performance Specifications
|
Materials of Construction
|
Nominal Dimensions
|
Benefits
|
Applications
|
Note
Specifications
Media Type |
N/A Non-Asbestos |
Grade Designation |
N/A 600 |
Formulation |
N/A K Grade |
Series |
N/A Utility |
Type |
N/A Handles |
Cartridge Style |
N/A 9 |
Performance Specifications
Differential Pressure @ 140ºF (60ºC) |
N/A to 35 psid2.5 bar |
Recommended Change-out Pressure |
N/A 30 psid2.04 bar |
Maximum Operating Temperature |
N/A 185 ºF85 ºC |
Recommended Flow Rate |
N/A 0.5 to 1.0 gpm/ft²20 to 40 lpm/m² |
Materials of Construction
Media Material |
N/A Cellulose Fibers with Inorganic Filter Aids |
End Caps Material |
N/A Polypropylene |
Cartridge Straps Material |
N/A Stainless Steel |
Gasket Material |
N/A Ethylene Propylene Neoprene Nitrile PTFE Silicone Viton® |
Nominal Dimensions
Diameter |
N/A 11 1/8 in28.3 cm |
Height |
N/A 7 11/16 in19.5 cm |
Filter Area |
N/A 11 ft²1.0 m² |
Benefits
N/A
|